linux DDoS & CC防护之(一)内核优化(nf_conntrack: table full 解决思路)

缓解DDoS && cc 的最佳Linux内核设置,源至国外

https://javapipe.com/blog/iptables-ddos-protection/

kernel.printk = 4 4 1 7 
kernel.panic = 10 
kernel.sysrq = 0 
kernel.shmmax = 4294967296 
kernel.shmall = 4194304 
kernel.core_uses_pid = 1 
kernel.msgmnb = 65536 
kernel.msgmax = 65536 
vm.swappiness = 20 
vm.dirty_ratio = 80 
vm.dirty_background_ratio = 5 
fs.file-max = 2097152 
net.core.netdev_max_backlog = 262144 
net.core.rmem_default = 31457280 
net.core.rmem_max = 67108864 
net.core.wmem_default = 31457280 
net.core.wmem_max = 67108864 
net.core.somaxconn = 65535 
net.core.optmem_max = 25165824 
net.ipv4.neigh.default.gc_thresh1 = 4096 
net.ipv4.neigh.default.gc_thresh2 = 8192 
net.ipv4.neigh.default.gc_thresh3 = 16384 
net.ipv4.neigh.default.gc_interval = 5 
net.ipv4.neigh.default.gc_stale_time = 120 
net.netfilter.nf_conntrack_max = 10000000 
net.netfilter.nf_conntrack_tcp_loose = 0 
net.netfilter.nf_conntrack_tcp_timeout_established = 1800 
net.netfilter.nf_conntrack_tcp_timeout_close = 10 
net.netfilter.nf_conntrack_tcp_timeout_close_wait = 10 
net.netfilter.nf_conntrack_tcp_timeout_fin_wait = 20 
net.netfilter.nf_conntrack_tcp_timeout_last_ack = 20 
net.netfilter.nf_conntrack_tcp_timeout_syn_recv = 20 
net.netfilter.nf_conntrack_tcp_timeout_syn_sent = 20 
net.netfilter.nf_conntrack_tcp_timeout_time_wait = 10 
net.ipv4.tcp_slow_start_after_idle = 0 
net.ipv4.ip_local_port_range = 1024 65000 
net.ipv4.ip_no_pmtu_disc = 1 
net.ipv4.route.flush = 1 
net.ipv4.route.max_size = 8048576 
net.ipv4.icmp_echo_ignore_broadcasts = 1 
net.ipv4.icmp_ignore_bogus_error_responses = 1 
net.ipv4.tcp_congestion_control = htcp 
net.ipv4.tcp_mem = 65536 131072 262144 
net.ipv4.udp_mem = 65536 131072 262144 
net.ipv4.tcp_rmem = 4096 87380 33554432 
net.ipv4.udp_rmem_min = 16384 
net.ipv4.tcp_wmem = 4096 87380 33554432 
net.ipv4.udp_wmem_min = 16384 
net.ipv4.tcp_max_tw_buckets = 1440000 
net.ipv4.tcp_tw_recycle = 0 
net.ipv4.tcp_tw_reuse = 1 
net.ipv4.tcp_max_orphans = 400000 
net.ipv4.tcp_window_scaling = 1 
net.ipv4.tcp_rfc1337 = 1 
net.ipv4.tcp_syncookies = 1 
net.ipv4.tcp_synack_retries = 1 
net.ipv4.tcp_syn_retries = 2 
net.ipv4.tcp_max_syn_backlog = 16384 
net.ipv4.tcp_timestamps = 1 
net.ipv4.tcp_sack = 1 
net.ipv4.tcp_fack = 1 
net.ipv4.tcp_ecn = 2 
net.ipv4.tcp_fin_timeout = 10 
net.ipv4.tcp_keepalive_time = 600 
net.ipv4.tcp_keepalive_intvl = 60 
net.ipv4.tcp_keepalive_probes = 10 
net.ipv4.tcp_no_metrics_save = 1 
net.ipv4.ip_forward = 0 
net.ipv4.conf.all.accept_redirects = 0 
net.ipv4.conf.all.send_redirects = 0 
net.ipv4.conf.all.accept_source_route = 0 
net.ipv4.conf.all.rp_filter = 1

nf_conntrack: table full 解决思路

file

A、如何验证nf_conntrack table full,他表现的现象是 无法进行连接
    方式一:dmesg -t 

    方式二:对比 最大值nf_conntrack_max  与 当前值nf_conntrack_count 
        cat /proc/sys/net/netfilter/nf_conntrack_max     查看该数字
        cat /proc/sys/net/netfilter/nf_conntrack_count

    方式三:实时监控 连接表数量
        watch -n 1 'conntrack -L | wc -l'

B、解决方法:增大连接表,缩短tcp连接释放时间
cat >> /etc/sysctl.conf << EOF
net.netfilter.nf_conntrack_max = 10000000
net.netfilter.nf_conntrack_tcp_timeout_established = 1800 
net.netfilter.nf_conntrack_tcp_timeout_close = 10 
net.netfilter.nf_conntrack_tcp_timeout_close_wait = 10 
net.netfilter.nf_conntrack_tcp_timeout_fin_wait = 20 
net.netfilter.nf_conntrack_tcp_timeout_last_ack = 20 
net.netfilter.nf_conntrack_tcp_timeout_syn_recv = 20 
net.netfilter.nf_conntrack_tcp_timeout_syn_sent = 20 
net.netfilter.nf_conntrack_tcp_timeout_time_wait = 10 
EOF

    sysctl -p

C、附 conntrack 工具用法
    conntrack -F        # 清除连接跟踪表
    conntrack -L        # 查询连接列表
    conntrack -L -p tcp     # 查询TCP连接列表
    conntrack -L > /tmp/123.txt      # 导出连接表
声明:本文为原创,作者为 辣条①号,转载时请保留本声明及附带文章链接:https://boke.wsfnk.com/archives/444.html
谢谢你请我吃辣条谢谢你请我吃辣条

如果文章对你有帮助,欢迎点击上方按钮打赏作者

最后编辑于:2023/8/30作者: 辣条①号

现在在做什么? 接下来打算做什么? 你的目标什么? 期限还有多少? 进度如何? 不负遇见,不谈亏欠!

暂无评论

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注

arrow grin ! ? cool roll eek evil razz mrgreen smile oops lol mad twisted wink idea cry shock neutral sad ???

文章目录